.PDF Version
Bullnose
Standard Bullnose

3/4" Radius

Bullnose cornerbead is used to create smooth, rounded corners. The knurled surface and distinctive hole pattern produce superior joint compound adhesion. 7/8" nailing flange.
Prod# Lgth Pcs/Ctn Ft/Ctn Ctns/Pallet Unit Wt/Ctn
42180 8 ft 50 400 40 MF 62
42190 9 ft 45 400 40 MF 62
42200 10 ft 40 400 40 MF 62

Short Flange Bullnose SF400

3/4" Radius

Bullnose cornerbead is used to create smooth, rounded corners. The knurled surface and distinctive hole pattern produce superior joint compound adhesion. 5/8" nailing flange.
Prod# Lgth Pcs/Ctn Ft/Ctn Ctns/Pallet Unit Wt/Ctn
42205 8 ft 50 400 40 MF 55
42207 10 ft 40 400 40 MF 55

Soft White Bullnose

3/4" Radius

Bullnose cornerbead is used to create smooth, rounded corners. The knurled surface and distinctive hole pattern produce superior joint compound adhesion. Painted white for increased adhesion. 5/8" nailing flange.
Prod# Lgth Pcs/Ctn Ft/Ctn Ctns/Pallet Unit Wt/Ctn
42225 8 ft 50 400 40 MF 55
42227 10 ft 40 400 40 MF 55

Open Angle 135 Degree Bullnose

3/4" Radius

135 Degree Bullnose provides a straight smooth finish for open angles greater than 120 degrees.
Prod# Lgth Pcs/Ctn Ft/Ctn Ctns/Pallet Unit Wt/Ctn
42210 8 ft 50 400 40 MF 64
42220 10 ft 40 400 40 MF 64

Kerf Bullnose

3/4" Radius

Kerf Bullnose provides a finished edge around door and window openings. Installation is made easier because the back flange is eliminated.
Prod# Lgth Pcs/Ctn Ft/Ctn Ctns/Pallet Unit Wt/Ctn
42230 7 ft 58 406 40 MF 49
42240 8 ft 50 400 40 MF 49
42250 9 ft 45 405 40 MF 49
42260 10 ft 40 400 40 MF 49

Bullnose Door and Window Trim 1/2"

Use this Bullnose Door and Window Trim for application with 1/2" wallboard.
Prod# Lgth Pcs/Ctn Ft/Ctn Ctns/Pallet Unit Wt/Ctn
42270 7 ft 29 203 40 MF 32
42280 8 ft 25 200 40 MF 32

Bullnose Door and Window Trim 5/8"

Bullnose Door and Window Trim is ideal for creating rounded corners for door and window openings.
Prod# Lgth Pcs/Ctn Ft/Ctn Ctns/Pallet Unit Wt/Ctn
42290 7 ft 29 203 40 MF 32
42300 8 ft 25 200 40 MF 32

Bullnose "J" Round

3/4" Radius

Use Bullnose "J" Round to create rounded corners for door and window openings. Perfect for use with non-kerfed door jambs.
Prod# Lgth Pcs/Ctn Ft/Ctn Ctns/Pallet Unit Wt/Ctn
42307 8 ft 25 200 40 MF 24.5
42309 10 ft 20 200 40 MF 24.5


Finishing Products | Accessories | Technical Bulletins | Submittal Sheets | MSDS | LEEDS | Industry Links | Site Map | Contact Us | Home
Copyright © 2010 Hamilton Drywall Products, All rights reserved.